MCS.
- Labels are pushed up
- Quickly start
- 400.000 label per hour
MCS.
Microcomputerized Label Punching Machine.
Microcomputerized label punching machine, is fully hydraulic, developed to die cut paper strips.
The MCS is an excellent machine for producing a wide variety of bottle neck-labels for champagne, wine and cards, etc. A considerable saving of paper is permitted by special punching system.
MCS has two different unloadig devices for punched labels. Small and medium sized labels are pushed up through the die while the waste comes down into a steel container. Big labels are pushed down after die cutting by a mechanical device with a compression spring.
Labels come out of the punching section onto an unloading table. The die is affixed by means of four adjusting clamps. Change over of dies takes a few minutes. The MCS die cuts within a tolerance of 0,025 mm and the production is up to 400.000 labels per hour.
Technical data:
| Version | Usable punching surface | Max cutting size | Min cutting size | Stack height | Trim margin | Strokes per minute | Cutting pressure | Installed power | Net weight | Dimensions |
|---|---|---|---|---|---|---|---|---|---|---|
| MCS 8 | mm 130×1.000 | mm 120×120 | mm 20×40 | mm 0÷45 | mm 0÷5 | max 50 | Kg. 6.000 | HP 5,5 | Kg 600 | mm 2.400×600 |
| MCS 10 | mm 260×1.000 | mm 250×250 | mm 20×45 | mm 0÷45 | mm 0÷5 | max 50 | Kg. 8.000 | HP 7,5 | Kg 800 | mm 2.600×700 |
| MCS 12 | mm 490×1.000 | mm 485×485 | mm 70×150 | mm 0÷45 | mm 0÷5 | max 50 | Kg. 20.000 | HP 10 | Kg 1.500 | mm 3.200×1.000 |
PNEUMATIC GRIPPER FOR THE MATERIAL TO BE PUNCHED, PROGRAMMABLE
SIDE PLIERS FOR DISTENSION OF THE MATERIAL TO BE PUNCHED
ROTATION SYSTEM OF THE REACTION DISK IN NYLON
CONTROL PANEL WITH TOUCH SCREEN DISPLAY
BACK PRESSURE GROUP, INSIDE THE DIE
PROGRAMMABLE GROUP FOR CUTTING DEPTH’S SETTING
